• HOME
  • 中文版
Products
U.P.S (Single Phase)

U.P.S (Single Phase)


● High Quality
1. Double Conversion True On-line UPS with zero transformer time
2. Industrial grade UPS
3. IGBT/PWM technology, small volume, low noise and high reliable
4. Microcomputer control, high efficiency and accuracy

● Safe
1. Bypass Switch Switching
2. Indepentdent three phase inverter, ableto support 100% unbalance  loading.
3. Isolated Rectifier& Battery Charger. Load current will not be affected  when input power returns.
4. EMI/ RFI and overload protection
5. Static Two-way Switch
6. Protecting for overload and shout citcuit.
7. With output and input isolated transformer in order to prevent noise and lightening suit for SMI/ AI/ BGA precision equipment. 
8. Static bypass and amintentance bypass are satandard features, allowing the UPS to 9. maintain power even during high overload or maintenance.
9. Cold start funtion. The UPS can be started with battery for emergent power on.

● Flexibility
1. 12 Pulse communicator to lower  input current harmonics
2. Expandable battery (option)
3. RS-232 communication port and SNMP management are available on request.

● Simple
1. Module design is easy to maintain
2. LED/ LCD faceplate
3. small size, save time, energy and space

Description

 

        Static Type UPS (On Line) uses charger to offer battery electricity. Inverter produces sine AC for load. When AC is interrupted, inverter produces sine AC for load by battery.

  1. English LCD system, displaying UPS working flow chart, working value and guiding operating indication.
  2. Illustration by computer’s speech sound system.
  3. If the battery is over-discharged the life for normal use is then reduced; for the purpose of protecting the battery, which is provided with double check protects including special designed circuits with function of automatic shut down, and avoiding inverse connection and short circuit happened.
  4. Exploiting IGBT power component to achieve the function of less volume, low noise and high reliability.
  5. ONE-TOUCH button makes turn on more convenient. 
  6. On Line design, without interruption of power suddenly.

Specification

 

Model CTL-1000 CTL-1500 CTL-2000 CTL-3000 CTL-6000 CTL-10000
Capacity 800W 1200W 1600W 2400W 4800W 8000W
Input Low Line Transfer 160VAC±5% or 80VAC±5% (Full load) 176VAC±3%(Full load)
110VAC±5% or 50VAC±5% (Half load) 110VAC±3%(Half load)
Low Line Comeback 175VAC±5% or 85VAC±5% (Full load) 186VAC±3%(Full load)
120VAC±3%(Half load)
High Line Transfer 300VAC±5% or 150VAC±5% 300VAC±3%
High Line Comeback 290VAC±5% or 145VAC±5% 290VAC±3%
Frequency Range 40 ~ 70 HZ 46 ~ 54HZ or 56 ~ 64HZ
Phase Single Phase with ground
Power Factor >=0.99 (Full load)
Output Voltage 208 / 220 / 230 / 240 VAC or 110 / 115 / 120 / 127 VAC 208/220/230/240 VAC
Voltage Regulation ±3% (Batt. Mode) ±1% (Batt. Mode)
Frequency Range (AC Mode) 47 ~ 53 HZ or 57 ~ 63 HZ 46 ~ 54HZ or 56 ~ 64HZ
Frequency Range (Batt. Mode) 50 ± 0.25 HZ or 60 ± 0.3 HZ 50 ±0.1HZ or 60 ±0.1HZ
Overload 100% ~ 110% : Audible Warning
110% ~ 130% : Transfers to bypass mode when the utility is normal / Shuts down in 30 seconds at battery mode
>130% : Transfers to bypass mode when the utility is normal / Shuts down immediately at battery mode
Current Crest Ration  3:1
Harmonic Distortion <=3% (linear load) <=4% (linear load) <=3% (linear load)
<=6% (non-linear load) <=7%(non-linear load) <=6%(non-linear load)
Transfer Time AC Mode -> Batt. Mode : 0ms
Batt. Mode -> Bypass : 4ms Batt. Mode -> Bypass : 0ms
Wavefrom (Batt. Mode) Pure Sine Wave
Efficiency AC Mode 85% 88% 89%
Bttery Mode 83% 88%
Alarm Battery Mode Sounding every 4 seconds
Low Battery Sounding every seconds
Overload Sounding twice every second
Fault Continuously sounding
Indicator LCD Display UPS Status, Load Level, Battry Level, Input/ Output Voltage, Discharging Time, Fault
Battery Battery Type 12 / 7AH 12V / 9AH 12V / 7AH 12V / 9AH 12V / 7AH 12V / 9AH
Numbers 3 3 6 6 20 20
Recharge Time(Recover to 90% capacity) 4 Hours 7 Hours 9 Hours
Max Charging Current 1.0 A
Charging Voltage 41.0VDC±1% 82.1VDC±1% 273VDC±1%
Communication RS-232 or USB Support WIN 2000 / 2003 / XP / 2008/7 , Linux, MAC
SNMP(optional) Power management from SNMP manger
Environment Temperature 0 ~ 40 °C
Himidity 20 ~ 90% (Non-condensing)
Noise (Less than 1 meter) 45 DB 55 DB 58DB
Dimension mm 397 x 145 x 220 421 x 190 x 318 592 x 250 x 576
Weight Kgs 13 14 26 28 81 83